Date And Time Entry - Kyocera KM-2560 Operation Manual

Preparation Before Use

Date and Time Entry

2-6
Register the date and time of the machine's built-in clock. Because the
FAX delayed transmission is conducted based on the time registered here,
be sure to register the correct date and time.
IMPORTANT: Correct the time displayed on the touch panel of the
operation panel regularly. Otherwise, the time displayed may eventually
deviate from the current time.
1
Press the System Menu key.
2
Press [ ], [Date/Timer], and then [Change] of Date /Time.
3
Enter the date and
time using [+]/[-].
Enter the time by a
24-hour system.
NOTE:
Settings include Year (Y), Month (M), Date (D), Hour (H), Minute
(M) and Second (S).
4
Select Summer Time if appropriate.
5
Press [OK].
6
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Date/Timer - Date/Time
Set the date and time.
2007 10
Y
10
H
Status
10
M D
Summer Time
Off
0 0
M S
On
Cancel OK
10/10/2007 10:00
OPERATION GUIDE