Chain Dial - Kyocera KM-2560 Operation Manual

Chain Dial

OPERATION GUIDE
Chain dial is a function that allows you to dial by linking fax numbers of the
receiving systems with a chain number created with a number common to
several destinations. By setting a toll free number and an area code to a
chain number, you do not need to enter such numbers for each
transmission.
NOTE:
You can use the chain number at the head of the fax number of
the receiving system.
It is convenient to register chain numbers that are used frequently to the
Address Book or One-touch keys. For registration to the Address Book,
refer to Registering a New Destination on page 3-16. For registration to
One-touch keys, refer to Registering a New One-touch Key on page 3-28.
As an example, when using '212' as the chain number
1
Press the Send/FAX key.
2
Place the originals.
3
Press [FAX No. Entry], and enter '212' using the numeric keys, and press
[OK]. To use the Address Book or One-touch keys, select the destinations
to which '212' has been registered.
NOTE:
For the Address Book and One-touch keys, refer to Using the
Address Book on page 3-16 and Using One-touch Keys on page 3-28.
4
From the destination
display, select the
destination to which
'212' has been
registered, and
press [Chain].
5
Enter the fax number to connect to the chain number.
Use the numeric keys to enter a fax number
1
Press [FAX No. Entry]. '212' is already entered, and then enter the
fax number. Press [Next Dest.] to enter the next fax number.
2
After entering all the destinations, press [OK].
FAX Operation (Advanced)
Ready to send.
Destination
Free 212
On Hook Chain Detail /Edit
001 002 003
Free
A OFFICE
006 007 008
Destination Quick Setup Type of Original/
Transmission
Status
Destination
1
Detail
Address Book
E-mail
1/1
Addr Entry
Folder Path
Entry
Delete Recall
FAX No.
Entry
004 005 No.
i-FAX
Addr Entry
009 010
1/10
Color/Image Advanced
Setup
10/10/2007 10:00
4-9
4