Drd Reception (Available For Inch Versions Only) - Kyocera KM-2560 Operation Manual

Setup and Registration

DRD Reception (Available for inch versions only)

6-14
This reception mode utilizes the Distinctive Ring Pattern service available
through some telephone companies. With this service, you can use two or
more fax numbers on a single telephone line. Thus, you can use this fax
and a telephone on the same line, and you can still designate a different
fax number for each of them. As each number is given a different ring
pattern, the machine is able to differentiate between incoming calls. If one
of these numbers is designated for the machine, and a desired ring pattern
is designated for that number in advance, fax reception will be initiated
automatically whenever the machine detects the ring pattern distinctive to
the fax.
NOTE:
Using DRD Reception to receive a telephone call is only possible
if a separately purchased telephone is connected to the machine. DRD
reception is only possible if you subscribe to the Distinctive Ring Pattern
service provided by your telephone company. Contact your telephone
company for further information on the Distinctive Ring Pattern service
available.
Flow of reception
FAX
If the other party has
dialed your fax number...
The fax machine will ring
using the predetermined
ring pattern for a fax and
fax reception will start
automatically. (The fax will
handle the call using the
Automatic FAX Reception
mode.)
Preparation: Refer to Receiving Mode on page 6-10 to select [Auto
(DRD)].
Telephone
If the other party has
dialed your telephone
number...
Telephone company
The fax machine will ring
using the predetermined
ring pattern for a telephone
call. Conversation is
possible with the other
party if you answer the
telephone that is
connected to this fax
machine.
OPERATION GUIDE