05651238.qxd
29-05-02
When the bowl is full raise the end of the drain pipe to a height higher than the
top of the appliance to stop the flow of water. Empty and replace the bowl and
continue draining the machine until empty.
4. Once the machine is fully drained of water, clip the hose to the rear of the
machine. Press the door button and remove the load.
The door can be opened approximately 2 minutes after the power failure by simply
pressing the door button. Do not force open the door.
Important: the water and the load may be very hot!
•
Max. load of dry laundry
•
Water pressure
•
Spin speed
Measurements
•
Width
•
Depth
•
Height
NB: For specifications regarding electrical data, see the data plate on the front of
the washing machine (door area). You will also need to refer to the information on
the data plate should you need to contact the GIAS Service for any advice.
10:10
Page 34
Technical data
34
5kg
(0.5-8 bar)
0.05-0.8 MPa
1600 rpm
60cm
54cm
85cm