Hoover H160I Instructions For Use Manual page 14

05651238.qxd 29-05-02 10:10 Page 14
On reaching the set time mode you will be asked if you would like to select
"Relative" time or – by scrolling through using the "Extra Rinse" button – "Absolute"
time. Enter the preferred setting by pressing the "Time Saver" button.
When you have entered your preferred time-mode, the display will then ask for the
Enable Final Beeping to be set.
Enable Final Beeping (default setting – YES)
Here you have the option to have a beeping alarm to let you know the wash cycle
has finished. By pressing the "Extra Rinse" button you can scroll through the "yes"
and "no" options.
To enter your selection press the "Time Saver" button and the screen will then
move to the next stage and ask you if you wish to "Enable Memory"
Enable Memory (default setting – NO)
This is a useful feature if you frequently wash laundry using the same programme.
Selecting "Enable Memory" will tell the machine to remember the last programme/
functions used and set them in the memory. This function works only on cottons,
delicates, synthetics and woollens programme. The memory does not retain
settings within the special programme group.
Select "Yes" or "No" to this option by using the "Extra Rinse" and "Time Saver"
buttons.
The display will then show a message that asks if you require demo mode to be
set. Please set this option to "No" if not done so already – as this is for SERVICE
use only. If the demo mode option is not set on "NO" when exiting the Inter@ct
menu the wash programme WILL NOT commence. Demo Mode must be set at
"NO" for the wash cycle to commence. On entering "NO" via the "Time Saver"
button you will then be asked if you wish to "Exit Menu".
Exit Menu
If you are happy with the settings you have selected, you can now exit the menu
by selecting "Yes" via the "Extra Rinse" and "Time Saver" buttons.
However, if you are not happy with any of the settings selected you must select
"No" to the exit menu command and you can then commence the programming
from the beginning. By pressing the "Time Saver" button you are able to enter and
bypass each option individually until you reach the option you would like to re-set.
14