Technical Data; Safety Rules - Hilti TE7-C Operating Instructions Manual

4. Technical data

NOTE
The power tool is available in various voltage ratings. Please refer to the type identification plate for details of
the power tool's voltage and power rating.
Power tool
Rated power input
Rated power input
Rated current input
Mains frequency
Weight of power tool
Dimensions (L x W x H)
Drilling speed without hammering
Hammer drilling speed
Single impact energy
Noise and vibration information (measured in accordance with EN 60745):
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level.
Wear ear protection!
Uncertainty for the given sound level as per EN 60745 3 dB (A)
Typical weighted vibration at the grips
Other information about the power tool
Chucks
Drilling performance in medium-hard concrete
Protection class as per EN
Interference immunity
Radio and television interference suppression

5. Safety rules

5.1 General safety rules
WARNING! Read all instructions! Failure to follow all
instructions listed below may result in electric shock,
fire and/or serious injury. The term "power tool" in
all of the warnings listed below refers to your mains-
operated (corded) power tool or battery-operated
(cordless) power tool. SAVE THESE INSTRUCTIONS
TE 7‑C
Rated voltage 100 V: 680 W
Rated voltage 110 V: 660 W
720 W
Rated voltage 110 V: 6.3 A
Rated voltage 120 V: 6.3 A
Rated voltage 127 V: 6 A
Rated voltage 220 V: 3.5 A
Rated voltage 230 V: 3.3 A
Rated voltage 240 V: 3.2 A
50 to 60 Hz
3.2 kg
341 mm x 86 mm x 217 mm
0 to 900 r.p.m.
740 r.p.m.
2.6 J
100 dB (A)
89 dB (A)
10 m/s²
TE‑C CLICK
Diameter 16 mm: 56 cm³/min
Protection class II (double insulated) as perEN 60745
As perEN 55014‑2
As perEN 55014‑1
5.1.1 Work area
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
en
19