Thermador PRD30 Installation Manual page 22

Griddle Tilt Adjustment (Not on all models)
Check the griddle adjustment by pouring two tablespoons
of water on the back of the griddle plate. The water should
slowly roll into the grease tray. If not, adjust the two (2)
screws under the back of the griddle plate. Start with one
half turn counter-clockwise (CCW) of the screws. Further
adjustment should be made by one-quarter turn until water
slowly flows into the grease tray.
4
,&
-- countertop due to excessive temperatures.
CABINET
CAUTION:
DO NOT operate range if sides are lower than the
adjacent cabinet. This may damage the cabinet and
CABINET
CORRECT! -- Leveling legs should be adjusted so that the range
sides are at the same or higher level as the adjacent cabinet.
CABINET
®®® ®¢¢,®°®
RANGE
CABINET
•1% ."".
• . _..
Each Leveling Leg can be adjusted using a 3/8" socket or wrench
on the top of the leg, or using an adjustable wrench on the flats on
the sides of the foot,
Figure 15: Adjusting the Height of the Range
English 20