Changing The Color System And Scanning Mode; Changing The Picture Tone - JVC UX-GP7V Instructions Manual

Changing the Color System and Scanning
Mode
INFO
You can select the video output to match it to the color
system of your TV (NTSC or PAL).
• If you connect a progressive TV through the VIDEO
OUT (COMPONENT) jacks, you can enjoy a high
quality picture by selecting progressive scanning mode.
Before playback...
(while holding...)
Select for a conventional PAL or NTSC TV.
PAL/NTSC
Select for a PAL or NTSC progressive TV.
PAL PRG/
NTSC PRG • The PRGR (Progressive) indicator lights
on the display.

Changing the Picture Tone

While showing a playback picture on the TV, you can
select a preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1
While playing, display VFP setting screen.
(while holding...)
17
2
Select a preset picture tone.
Remote
Remote
ONLY ONLY
NORMAL
CINEMA
USER1/USER2
To clear the screen, press VFP again while holding SHIFT.
To adjust the picture tone
1
Select "USER1" or "USER2."
• Follow steps 1 and 2 explained in "To select a preset
picture tone."
2
Select a parameter you want to adjust.
Remote
ONLY
GAMMA
BRIGHTNESS
CONTRAST
SATURATION Adjust if the picture is whitish or
TINT
On the TV
SHARPNESS
3
Adjust the parameter.
4
Repeat steps 2 and 3 to adjust other parameters.
To clear the screen, press VFP again while holding SHIFT.
Normally select this.
Suitable for a movie source.
You can adjust parameters and
can store the settings. (See the
following.)
Adjust if the neutral color is bright or
dark (–3 to +3).
Adjust if the entire picture is bright
or dark (–8 to +8).
Adjust if the brightness ratio is
unnatural (–7 to +7).
blackish (–7 to +7).
Adjust if the human skin color is
unnatural (–7 to +7).
Adjust if the picture is indistinct
(–8 to +8).