Playing Back An Apple Ipod - JVC UX-GP7V Instructions Manual

Micro component system
Table of Contents

Advertisement

To move to the next or previous page of the current
menu:
Moves to the next page.
Moves to the previous page.
To return to the previous menu:
(while holding...)
To cancel PBC, press 7, then select a track by using the
number buttons (see page 9). Playback starts with the
selected track.
To reactivate PBC, press 7 (twice if RESUME is turned
on), then press DVD/CD 6.

Playing Back an Apple iPod

JVC is not responsible for any loss of or damage to
iPod that might result from the use of this System.
• For details, refer also to the instruction manual for iPod.
• Before viewing a video/picture from your iPod on the
monitor, make the appropriate video setting on the iPod
and on the monitor. For details of the setting, see the
instruction manual for iPod.
• For connection, refer to page 6.
When an iPod is connected...
To start/pause:
To turn off iPod (Sleep Mode):
• When you press iPod 6
again, playback starts from the
position where you have stopped
previously.
• After connecting an iPod, wait until the unit is ready for
operation (about 3 seconds).
• Do not touch or hit the iPod terminal pins or connector
pins in the iPod dock directly. It might cause damages to
the connector part.
• When you connect your iPod to the dock, make sure the
terminal on the dock is fully inserted into the iPod.
• Do not carry the System with iPod dock open and iPod is
• Remove the iPod from the dock when you do not use it.
• When you cannot operate the connected iPod through
• You cannot send any data to your iPod from the System.
• When changing to other sources or turning off the
• If there is no video output on the monitor, check the iPod
While playing...
INFO
While playing...
connected. You might drop it or it might cause damages
to the iPod dock.
the unit or using the remote control, operate the iPod
directly.
System, set the iPod to the menu screen. Failing to do
so might cause the iPod to freeze or lag during video
viewing.
setting, then reconnect the iPod again. Make sure the
iPod is fitted in the iPod dock securely.
To select a track/file
• When you press 2 for the first
time, you will go back to the
beginning of the current track/
file.
To fast-forward/reverse the track/file
To stop searching, release the
button.
To display the menu/Return to the
previous menu
To select an item on the menu/screen:
• The 5/∞ buttons work in the same way as operating
the iPod's click wheel counterclockwise/clockwise.
(Refer to the iPod's instruction manual for details.)
Remote
ONLY
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ca-uxgp7vSp-uxgp7v

Table of Contents