Changing The Scanning Mode; Changing The Picture Tone - JVC UX-G49 Instructions Manual

Changing the Scanning Mode

This System supports progressive scanning.
Select the video signal output according to the type of your
TV. If you connect a progressive TV through the
COMPONENT VIDEO OUT jacks, you can enjoy a high
quality picture playback by selecting "PROGRESS."
Before playback...
SCAN MODE
9
(while holding...)
For a conventional TV.
RGB
Select to send the composite video signals
or RGB signals through the AV (SCART)
terminal.
For a conventional TV.
Y/C
Select to send S-Video signals through the
AV (SCART) terminal.
PROGRESS For a progressive TV.
Select to enjoy a progressive scanned
picture through the COMPONENT
VIDEO OUT jacks.
• The (Progressive) indicator lights on
the display.

Changing the Picture Tone

While showing a playback picture on the TV, you can select
a preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1 While playing, display VFP setting screen.
VFP
10
(while holding...)
Remote
INFO
ONLY
RGB Y/C
PROGRESS
ENTER/SET
Remote
ONLY
NORMAL
0
GAMMA
0
BRIGHTNESS
0
CONTRAST
0
SATURATION
0
TINT
0
SHARPNESS
On the TV
2 Select a preset picture tone.
PTY PTY
Normally select this.
NORMAL
Suitable for a movie source.
CINEMA
You can adjust parameters and can
USER1/USER2
store the settings.
To clear the screen, press VFP again while holding SHIFT.
To adjust the picture tone
1 Select "USER1" or "USER2."
• Follow steps 1 and 2 explained in "To select a preset
picture tone."
2
Select a parameter you want to adjust.
TV CH
TV CH
Adjust if the neutral color is bright
GAMMA
or dark (–3 to +3).
Adjust if the entire picture is bright
BRIGHTNESS
or dark (–8 to +8).
Adjust if the brightness ratio is
CONTRAST
unnatural (–7 to +7).
Adjust if the picture is whitish or
SATURATION
blackish (–7 to +7).
Adjust if the human skin color is
TINT
unnatural (–7 to +7).
Adjust if the picture is indistinct
SHARPNESS
(–8 to +8).
3 Adjust the parameter.
TV CH
TV CH
4 Repeat steps 2 and 3 to adjust other parameters.
To clear the screen, press VFP again while holding SHIFT.
NORMAL CINEMA
USER2 USER1
ENTER/SET
ENTER/SET
14