JVC UX-GP7V Instructions Manual page 36

Menu Item
PICTURE SOURCE
SCREEN SAVER
FILE TYPE
DIGITAL AUDIO OUTPUT
DOWN MIX
D. RANGE COMPRESSION
RESUME
ON SCREEN GUIDE
DivX REGISTRATION
33
Contents
You can obtain optimal picture quality by selecting the source type of the video
source.
AUTO: Normally, select this option. The System recognizes the picture type (film
or video source) of the current picture according to its information.
FILM: For a film source picture.
VIDEO: For a video source picture.
You can set the screen saver function (ON or OFF). If no operation is done for
about 5 minutes, the TV screen dims.
You can select the file type to play.
AUDIO: To play MP3/WMA/WAV files.
STILL PICTURE: To play JPEG files.
VIDEO: To play MPEG-1/MPEG-2/DivX files.
Set this item correctly when using the OPTICAL DIGITAL OUT terminal on the
rear.
PCM ONLY: When connecting to audio equipment which is compatible with only
linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an
amplifier with a built-in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-
in DTS decoder.
This setting is effective for digital audio output if "DIGITAL AUDIO OUTPUT" is
set to "PCM ONLY."
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, etc.
You can enjoy powerful audio even at a low volume level while playing Dolby
Digital software.
AUTO: Select to apply the effect to multi-channel encoded software.
ON: Select to always use this function.
You can select Resume.
ON: The System resumes playback from the position where playback has been
stopped.
OFF: Resume is deactivated.
Activate (ON) or deactivate (OFF) the on-screen guide (see page 10).
The System has its own Registration Code.
If necessary, you can confirm it.
Once you have played back a DivX file in which the Registration Code is recorded,
the System's Registration Code is overwritten for copyright protection.