Memory Configuration Table - SOYO SY-P4I845PE Quick Start Manual

SYP4I845PE Quick Start Guide
FJ1 jumper (beside the AGP slot)
Thi s j u mper sets the defaul t boot-up CPU frequency and the group of FSB frequenci e s that can be selected i n the BIOS.
CPU FSB
FJ1 Jumper
Configure Memory
Step 2.
This motherboard support PC2100 and PC2700, Non-ECC and non-registered module.
The largest memory capacity possible is 2GB. On this motherboard, DRAM speed can
be set independent from the CPU front side bus speed. A maximum of 2 pcs.
Double-sided module can be used at the same time.

Memory Configuration Table

DDR1
Double sided
Double sided
Double sided
Single sided
Note: System must have 533MHz FSB CPU to have PC2700 memory support.
Connect cables, case wires, and power supply Install expansion
Step 3.
cards
This section tells how to connect internal peripherals and the power supply to the Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front
Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.),
Wake-On-LAN card, VGA card, Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-P4I845PE
Motherboard, please refer to SY-P4I845PE Motherboard User' s Manual and T echnical Reference
online manual on the CD-ROM.
100MHz FSB Auto Detect FSB
3 2 1
DDR2
Double sided
Single sided
Single sided
Single sided
8
133MHz FSB
3 2 1
3 2 1
DDR3
None
None
Single sided
none