remain unchanged.
4. After the create operation is complete, please shut down all
other programs. And then click
The user may also select
Warning:
In the creation of the span array, only the data on the first member
disk will be preserved while the data on others will be completely
destroyed.
Note:
At least two hard disks are needed in the creation of the span array.
Disks can be connected at any cable and settled as either master or
slave device.
VII Create 0+1 Array
The following steps shall be taken to create the 0+1 array.
1. Click
0+1
2. Select the strip size.
icon on the tool bar.
99
Yes
to restart the computer.
No
to restart the computer later.