SOYO SY-P4I Fire DRAGON User Manual page 114

Install driver during Windows 2000 installation
1. Go to "d:\raid\hpt372\" directory, (assuming that your
CD-ROM is drive d) copy all the files and directory to a
floppy disk
2. If Windows 2000 is installed from the floppy drive, please let
the installing program run automatically. If Windows 2000 is
installed from the CD-ROM drive, please
message
or RAID driver
3. Press
Windows 2000 Setup
4. Insert the floppy disk of driver, then press
5. The system will ask whether to install driver under
or under
Windows 2000.
under
6. In the follow-on window of device type, please select
and press
7. The follow-on interface will list the devices to be installed, in
which HPT370/HPT372 UDMA/ATA RAID Controller
should be included.( If users want to install other devices,
please operate at this time. If all devices have been
successfully installed, please go to next.)
Install driver during Windows XP installation
Go to "d:\raid\\hpt372\" directory, (assuming that your
1.
CD-ROM is drive d) copy all the files and directory to a
floppy disk.
2. Booting from CD-ROM, when the
screen appear and prompt user to press F6 key to install
third party SCSI or RAID driver, please press F6 Key.
3. Press
Windows XP Setup
4. The system will ask whether to install driver under
Press F6 if you need to install third party SCSI
appears.
S key to specify additional devices when the
Windows 2000, please select to install driver
Enter to continue.
S
key to specify additional devices when the
window appears.
window appears.
Windows XP Setup
110
F6 key when the
Enter
to continue.
WinNT
Other
item
blue
WinNT