Table of Contents
Advertisement
4. If the user is to add the spare disk, select the hard disk to
be used in the follow-on dialog box, and then click
button.
5. If the user is to remove the spare disk, click
the follow-on dialog box.
V. Synchronize/Validate/Verify Mirror Array
Synchronize Mirror
After the completion of creating mirror array, the data on the source
disk has not been copied to the mirror disk. The data on the source
disk and the mirror disk do not keep identical yet. The user should
synchronize mirror, by which the data on the source disk will be fully
copied to the mirror disk. Thus the data on the disks in the mirror
array become identical. Once the creation of the mirror array is
finished, the user will be asked whether to synchronize mirror at
once or not. Select
skip.
The status of the mirror array will remain locked if
skip the synchronize operation. The user may at any time
synchronize mirror which is in either locked status or normal status.
The detailed steps to synchronize mirror are as follows:
Yes
to begin the synchronize operation or
96
Finish
Finish
button in
No
to
No
selected to
Advertisement
Table of Contents
