SOYO SY-P4I Fire DRAGON User Manual page 102

2. In the popup menu, select
Once the mirror disk is validated, it will be implicit by the program
that the data on the mirror disk is the same with that on the source
disk. And the program will no longer ask the user to synchronize
mirror. If the user wants to copy the data from the source disk to the
mirror disk, he has to synchronize mirror manually.
Verify Mirror
The operation of the verify mirror will compare the data on the
source disk and that on the mirror disk. If any discrepancy is found
between them, the program will ask the user to synchronize mirror
to keep the data in the mirror array identical. The detailed steps to
verify mirror are as follows:
1. Right-click the mirror array to be verified.
2. In the popup menu, select
By selecting this disk array, the user can check the verification
progress at the status pane.
Suggestion:
After the creation of the mirror array, if the user wants to keep the
source disk data preserved, he shall select
asks him whether to synchronize mirror or not.
VI. Create Span Array
Please follow the steps below to create the span array:
1. Click Span
2. In the popup window, select hard disks from
Disks
colume by clicking the corresponding arrow. Then click
Next to continue.
3. In the follow-on confirmation dialog box, please click
button to start the creation or click
the creation. If the user selects Cancel, the system will
Verify Mirror
icon on the tool bar.
colume. Add them into
Validate Mirror
item.
Yes
Span Array Member Disks
Cancel
98
item.
when the program
Available
Create
button to cancel