Chapter 7. Caring For Your Machine - Singer 5122 User Manual

Chapter 7. Caring for Your Machine
CLEANING
AND OILING YOUR
MACNINE
5
B ~
CAUTION: Before cleaning your machine, dis-
o-A
cP®connect
power line plug from your socket outlet.
Periodically, depending on usage, clean and oil
your machine as follows, using one drop of oil
6 4
on areas indicated:
_______ -
*Top
Interior Areas
To clean and oil top of machine, remove top
cover. Using a large screwdriver, remove
Iscrews A and B. Periodically, apply a drop of
-
/
oil only to areas indicated, after cleaning.
To replace top cover, align it over screwholes
Top Interimr Area
A and 9. Using a large screwdriver, replace
--- --- --- --- --- --- --- --- --- --- --- ---
screw s A and 9
.
-
.
Pace Plate Area
To clean and oil the front interior of machine,
loosen face plate screw A and swing open
A
. 4
face plate to left. With a soft cloth or lint
A.
brush, clean and oil points indicated by ar-
rows. To close face plate, simply swing it
A
back to right, snap it closed and tighten face
plate screw A.
Face Mlate Area
2
Bobbin Case Holder
To clean and oil bobbin case holder.
ý*EllTilt
machine back. Remove cover, if neces-
sary.
* Turn hand wheel until needle is at highest
position.
4 1. Remove bobbin case and open latches A
and B, as shown. For more information on
removing and replacing bobbin case, refer to
pages 12 and 13.
4 D2. Remove part C and part D of Bobbin Case
E~t DHolder,
as shown.
D Q c
3. Clean and oil areas indicated by arrows.
4, To replace bobbin case holder, insert padt D
8
with spindle E up, as shown.
4
C
5. Then fit padt C into place with flat side up, as
AýO
1c1
removed.
6,Close latches A and B over padt C.
9Replace cover, if necessary.
Remowhig
Bobbn
Cam
Holder
26