Singer 5122 User Manual page 14

1
REMOVING THE BOBBIN CASE
* When you prepare to sew, wind the bobbin first,
then thread the machine.
To Remove the Bobbin Case and Bobbin -
* Turn hand wheel toward you to raise take-up
A
lever to its highest position.
1. Open hook cover A as illustrated.
2. Grasp bobbin case latch B and withdraw
bobbin case.
_-Release latch and bobbin will drop out of
case.
THREADING THE BOBBIN CASE
C:
1. Hold bobbin case and
2. Place bobbin into bobbin
3. Pull thread under ten-
bobbin so that thread
case. Pull thread into
sion spring.D and into
leads off in direction
slot C.
slot E at end of spring, as
shown above.
shown.
12