Q-See QS218 User Manual page 46

DEVICE OPERATION
f. Clicking on Network will generate a Network settings dialog box as illustrated in Figure3.5.44. Checking the
[DDNS] box (RED box in Figure 3.5.44) will display a DDNS setting dialog box as illustrated in Figure 3.5.45.
g. Enter the User Name, Password and Domain Name that you registered for through http://myq-see.com.
Click the [APPLY] button at the bottom of the screen and then the [EXIT] button. This should return you to
the Network Setup menu.
h. Click the [APPLY] button and then the [EXIT] button at the bottom of the Network Setup Screen and your
DDNS setup is complete.
 DDNS: Select the ON option from the drop down menu.
 Service: Select myq-see from the drop down menu.
 Host Name: Enter the account name you setup on the myq-see site.
 Username: The email address you entered on the myq-see site.
 Password: Enter the password you setup on the myq-see site.
Figure 3.5.43
Figure 3.5.44
Figure 3.5.45
39 | P a g e
Model #: QS218