Table of Contents
Advertisement
DEVICE OPERATION
To set a recording schedule:
1)
Open the Main Menu and click RECORD.
2)
Under REC. MODE, select TIMER RECORD.
3)
Click SCHEDULE. The Schedule menu opens.
4)
Under CHANNEL, select specific channels or select ALL.
5)
Below the grid, click either ALARM (red), GENERAL (Green), or NO RECORD (Blue) and then click a time block
on the desired day.
6)
Use the FROM/TO drop-down menus to copy the schedule of one day to another. For example, if you want your
schedule for Monday to be the same on Wednesday: under FROM select MON, under TO select WED, and then
click COPY.
7)
Click SAVE.
8)
Click EXIT in each menu until all windows are closed.
Example
You want your system to record continuously on all channels from 9 AM to 5 PM Monday to Friday. You also want
Alarm/Motion recording from 5 PM to 9 AM. You do not want the system to record Saturday or Sunday.
NOTE: By default, the system is set to record continuously 24 hours a day, 7 days a week.
To set the recording schedule:
1)
Open the Schedule menu.
2)
Under CHANNEL, select ALL.
3)
Click the blue NO RECORD block below the grid. A checkmark will appear in the block.
4)
Under SUN, click blocks 00~23. The blocks will turn blue.
5)
Under FROM, select SUN. Under TO select SAT, and then click COPY.
6)
Click the red ALARM block below the grid.
7)
Under MON, click blocks 00~08 and blocks 18~23. The blocks will turn red.
8)
Under FROM, select MON. Under TO select TUE, and then click COPY. Repeat for Wednesday, Thursday, and
Friday. Your completed schedule should the same as the schedule in Figure 3.5.17.
9)
Click SAVE. Click CLOSE in the confirmation window.
10) Click EXIT in all menus until all windows are closed.
Figure 3.5.17
20 |
P a g e
Model #: QS218
Advertisement
Table of Contents
