Contacting Compro Technical Support - COMPRO IP70 User Manual

3. Please enable port forwarding in the router which the IP camera connected.
You may need to consult the manufacturer of your router. Note: Your router
may require a reboot after port forwarding had been set.
The above is a sample illustration of what you need to do in order to enable
remote viewing of the IP camera.
4. Once the above steps are done, you should be able to log-on to the camera
from a remote location. Please type in the DDNS address or the static IP
address depending on your configuration. For example, in this case, you
should enter
access to the camera.
Note: If you have multiple cameras installed on a network, you will need to
change the HTTP and RTSP port on the cameras manually so each one of
them will have a unique port. E.g. you may wish to change the HTTP and
RTSP server ports on the 2
nd
access the 2

Contacting Compro Technical Support

Before you submit an email for support, please check the troubleshooting list
above. You may fill out the form (http://comprousa.com/en/form.htm) or
directly email to support@comprousa.com
Compro Technology, Inc.
http://61.220.20.16:80
nd
camera to 81 and 554 respectively. You can
camera by typing in http://61.220.20.16:81.
www.comprousa.com
into the Internet Explorer to gain
60
IP70 IP Camera User's Manual
V1.5-100908