COMPRO IP70 User Manual page 24

IR lamps and LED Light of IP70 Camera
When you connect the power of IP70 camera, the camera will start booting
procedure. The IR lamps and LED light will be lighting as the following
procedure:
1. Once the IP camera Power On, the IR lamps and LED light will turn on
lighting IR Lamps are red, IR LED looks like purple (Red and Blue LEDs are
all turn on).
2. After about 20 seconds, the IR lamps will turn off.
3. Trying to connect: Both blue & red LED flashing in 0.5second interval.
4. Connection established: Blue LED constantly on. (Red LED off)
5. Connection failed: Flashing red LED. (Blue LED off)
LED Status:
Steady (Blue)
Successful
connection to the
network
Blue: The network connection
well
Blinking (Red)
The camera is
unable to connect
to the network
24
IP70 IP Camera User's Manual
Power On and Booting
start
Off
The unit is either
not working or the
LED had been
turned off.