COMPRO IP70 User Manual page 20

14. Step6: Here will display the old and
new settings, if ok, please click "Next",
or click "Previous" back to previous
settings.
15. Step7: System will save and reload
the new settings on your camera.
16. Step8: The iWizard will running
network diagnostics on your network
settings and warning the inappropriate
settings. (In the picture below shows
the RTSP port is not correct setup, you
have to setup the same port as your
router for using the RTSP service)
17. Step9: You can click the link on the
screen to direct access the web page
of your IP camera, and if you want to
setup another IP camera, please click
"Yes", or click "No" to install the
ComproView software.
20
IP70 IP Camera User's Manual