Manual Network Settings - Variquest Poster Maker 3600 User Manual

Manual network settings

Follow these steps to configure the Poster Maker for
manual network setup.
With the Standby screen displayed, press [Menu].
DTP BLK/WHT
36x47 NORMAL
Continue to press [Menu] until the Network Setup
selection screen is displayed. Then press [Select].
NETWORK SETUP SELECT
Press [Mode] until STATIC IP is shown in the second
line of the display.
IP TYPE MODE
STATIC IP
Press [Mode] to display STATIC IP.
Press [Select]. Enter the IP address provided by your
network administrator.
To enter values, press [Cut] to move the cursor to the
digit you want to change. Then press [Mode] to scroll
through the digits until the one you want is displayed.
IP ADDRESS
192.168.127.250
Press [Select]. Enter the default gateway address
provided by your network administrator.
Refer to step 4 for information on how to enter
values.
DEFAULT GATEWAY
192.168.127.001
VariQuest™ Poster Maker 3600
57 FT
Menu
01
Select
D
D
Press [Select]. Enter the subnet mask value provided
by your network administrator.
Refer to step 4 for information on how to enter
values.
6 times
SUB NET MASK
255.255.255.000
Press [Select]. When the MAC Address screen is
displayed, press [Select] to return to the IP Type
selection screen shown in step 3.
You cannot enter values for the MAC address.
MAC ADDRESS
00.01.09.03.0B.A1
Press [Menu] to return to the Network Setup selection
screen shown in step 2. Then press [Clear] to return
to the Standby screen.
Menu
Turn the printer's power off and then on again.
It is important to do this, so that the network settings
will take effect.
Power
switch
D
Clear
Advanced Features 4-5