Printing The Enlargement - Variquest Poster Maker 3600 User Manual

Printing the enlargement

Create a command sheet as described on page 3-13.
(Optional) Set the print mode, contrast and output
size.
See "Changing the print mode" on page 3-8,
"Changing the contrast" on page 3-9 and
"Changing the output size" on page 3-10. When
using the partial enlargement feature, you cannot
use the Multiple Copies or split printing features.
With the Standby screen displayed, press [Menu].
DTP BLK/WHT
36x47 NORMAL
The Enlarge Area selection screen is displayed.
When the Enlarge Area selection screen is displayed,
press [Select].
ENLARGE AREA SELECT
The Scan Area screen is displayed.
DTP SCAN AREA
36x47 NORMAL
Place the command sheet face down on the scanner,
and then press [Start/Stop].
3-14 The Basics
Menu
57 FT
01
Select
START
57 FT
Place the command sheet face
down on the scanner.
A "Scanning" message appears in the display while
the printer scans the command sheet. When it is
finished, the Original screen is displayed.
DTP ORIGINAL START
36x47 NORMAL 57 FT
Place the original face down on the scanner. Be sure
to use the same orientation you used when placing
the command sheet in step 5. Press [Start/Stop].
The printer scans the area of the original that you
highlighted on the command sheet and prints the
poster.
If necessary, press [Cut] to cut the paper.
When the Enlarge Area selection screen shown in
step 4 is redisplayed, press [Clear] to return to the
Standby screen.
Clear
VariQuest™ Poster Maker 3600