Use Of The Cooktop; Using The Rangetop - Smeg CE6GPXU Owner's Manual

Owners manual

Hide thumbs Also See for CE6GPXU:

Table of Contents

WARNING

NOTE: Check that the burner rings, burner caps and grates are correctly positioned.

Before lighting the rangetop burners check that the burner rings are correctly in place with their

respective burner caps, making sure that the slots A in the burner ring are aligned with the spark

electrodes and thermocouples. For the double burner, place the burner caps G and F on the burner ring

D, ensuring that they fit snugly. The burner head must then be placed on and fitted into the burner base

B (being careful to use the pin C as a guide). The burner base B is supplied for use with woks. The

special wok trivet H is also for use with woks.

8.1 Ignition safety device

Each burner knob has a marking corresponding to the burner it controls (the example at the left shows

the front left burner).

The appliance is equipped with a spark electrode ignition.

Just press in and turn the knob counterclockwise to the minimum flame symbol

turns on.

Keep the knob pressed in for about 2 seconds to keep the flame lit and to activate the safety device.

After turning the burner on, it is recommended that the knob be left in the minimum flame position for

approximately 20 seconds before adjusting it to the desired flame intensity.

The flame may go out when the knob is released. In this case, repeat the operation but keep the knob

pressed in for a longer period of time.

User instructions

FIRE HAZARD

Do not allow the burner flame to extend beyond the

edge of the pan.

Turn off all controls when not using the appliance.

until the burner

Table of Contents