Table of Contents
Advertisement
Quick Links
Table of Contents - Important Safety Instructions
1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4
2. DIMENSION REQUIREMENTS ............................................................................................... 7
3. UNPACKING, MOVING AND POSITIONING THE RANGE .................................................... 9
4. WALL ATTACHMENT AND THE ANTI-TIP DEVICE ............................................................ 10
5. ELECTRICAL REQUIREMENTS ........................................................................................... 13
6. GAS SUPPLY REQUIREMENTS .......................................................................................... 14
WARNING:
precisely, fire or explosion may result causing property damage, personal
injury or loss of life.
- Do not store or use gasoline or other flammable vapors or liquids near this
or any other appliance.
• Do not try to light any appliance.
• Do not touch any electrical switches.
• Do not use any telephones in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas
supplier's instructions.
• If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service
agency or gas supplier.
NOTE: THIS APPLIANCE MUST BE INSTALLED SOLELY AND EXCLUSIVELY BY A QUALIFIED
TECHNICIAN. ANY TECHNICAL PROCEDURES MUST BE CARRIED OUT BY AN AUTHORIZED
TECHNICIAN.
INSTRUCTIONS FOR THE USER: these instructions contain user advice, a description of the controls
and the correct procedures for cleaning and maintenance of the appliance.
If the instructions contained in this manual are not followed
WHAT TO DO IF YOU SMELL GAS
3
Advertisement
Table of Contents
Related Manuals for Smeg C24GGXU
Summary of Contents for Smeg C24GGXU
- Page 1 Table of Contents - Important Safety Instructions 1. IMPORTANT SAFETY INSTRUCTIONS ................. 4 2. DIMENSION REQUIREMENTS ....................7 3. UNPACKING, MOVING AND POSITIONING THE RANGE ............ 9 4. WALL ATTACHMENT AND THE ANTI-TIP DEVICE ............10 5. ELECTRICAL REQUIREMENTS ................... 13 6.
-
Page 2: Important Safety Instructions
Important Safety Instructions 1. IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS – Your safety and the safety of others are very important. We have provided many important safety messages throughout this manual and on the appliance. Read all the instructions before using the appliance and always obey all safety messages. RECOGNIZE SAFETY INFORMATION This is a safety alert symbol. -
Page 3: Tip Over Hazard
Important Safety Instructions TIP OVER HAZARD A child or adult can tip the range and be killed. Make sure that the anti-tip device has been properly installed and WARNING engaged. The wall-mounted brackets should anchor the sides of the range (primary system) or, in case of floor-mounted brackets, they should anchor the rear of the range to the ground. - Page 4 Important Safety Instructions ELECTRICAL GROUNDING REQUIRED: See the “Electrical Requirements” section. It is the customer’s responsibility: 1 To contact a qualified electrician to install the appliance 2 To ensure that the electrical system is adequate and conforms with the national ANSI / NFPA 70 ELECTRICAL CODE –...
-
Page 5: Dimension Requirements
2. DIMENSION REQUIREMENTS CLEARANCE MODEL 150 mm 216 mm 612 mm 636 mm 612 mm 457 mm 610 mm 330 mm C24GGXU ” 24 ” 25 “ 24 “ 18 “ 24 “ 13 “ ” 912 mm 216 mm... - Page 6 Instructions for the installer 2.1 Product dimensions Overall dimensions: location of electrical connection points. 60 mm - 2 ” 698 mm - 27 “ 753 mm - 29 “ 155 mm - 6 ” 157 mm - 6 ” 212 mm - 8 ”...
-
Page 7: Unpacking, Moving And Positioning The Range
Instructions for the installer 3. UNPACKING, MOVING AND POSITIONING THE RANGE CAUTION: This unit is designed as a cooking appliance. For safety purposes, never use it for warming the room or as a space heater. It is recommended that the grates, the griddle plate and burner heads, burner caps, front kick panel and oven racks be removed to facilitate handling. -
Page 8: Wall Attachment And The Anti-Tip Device
Instructions for the installer 4. WALL ATTACHMENT AND THE ANTI-TIP DEVICE TIP OVER HAZARD A child or adult can tip the range and be killed. Make sure that the anti-tip device has been properly installed and WARNING engaged. The wall-mounted brackets should anchor the sides of the range (primary system) or, in case of floor-mounted brackets, they should anchor the rear of the range to the ground. - Page 9 1 Level the range using the adjustable leveling legs. 2 From the floor, measure the height of the notch found on the bracket. This notch corresponds to the centerline of the holes for the screws that will fasten the brackets to the wall. C24GGXU ( C36GGXU ( ”...
- Page 10 Instructions for the installer C24GGXU ( C36GGXU ( ” 608 mm) ” 908 mm) (Front view) (Front view) 4 Correctly position the range so that the two screws perfectly align with the anti-tip brackets on the range.
-
Page 11: Electrical Requirements
Instructions for the installer 5. ELECTRICAL REQUIREMENTS ELECTRICAL GROUNDING INSTRUCTIONS WARNING ELECTRICAL SHOCK HAZARD Plug into a grounded 3-prong outlet. Do not cut or remove the grounding prong. WARNING Do not use an adaptor. Do not use an extension cord. Check with a qualified electrician if you are not sure whether the range is grounded. -
Page 12: Gas Supply Requirements
Instructions for the installer 6. GAS SUPPLY REQUIREMENTS EXPLOSION HAZARD Use a new AGA or CSA-approved gas supply line. Install a shut-off valve. WARNING Securely tighten all gas connections. lf connected to LP, have a qualified technician ensure that the gas pressure does not exceed a 14"... - Page 13 Instructions for the installer Always use pipe-joint compound made for use with NATURAL GAS and L.P. GAS between pressure regulator D and NPT adaptor C and between pressure regulator D and pipe E. If a flexible metal conductor is used, make sure that the tubing is not kinked.
- Page 14 Instructions for the installer Incoming line pressure upstream from the regulator must be 1” (2.5 cm) W.C.P. higher than manifold pressure in order to check the regulator. Incoming line pressure to the regulator should be as follows for operation and checking the regulator setting: - NATURAL GAS: manifold pressure 4”...
-
Page 15: What To Do If You Smell Gas
Important Safety Instructions IMPORTANT SAFETY INSTRUCTIONS WARNING: If the instructions contained in this manual are not followed precisely, fire or explosion may result causing property damage, personal injury or loss of life. - Do not store or use gasoline or other flammable vapors or liquids near this or any other appliance. -
Page 16: Fire Hazard
Important Safety Instructions The safety messages will inform you of potential hazards, on how to avoid the risk of injury and what can occur if the instructions are not followed. IMPORTANT: Observe all governing codes and ordinances. WARNING: For your safety, the instructions contained in this manual must be followed to minimize the risk of fire or explosion and to prevent property damage, personal injury or loss of life. - Page 17 Conversion Kit Check that the main gas supply line to the range is shut off and that the power supply cord is disconnected. Remove access cap “A” by using a screwdriver or a coin, turning the access cap counterclockwise. The gas pressure regulator has two settings which are indicated on two sides of the cap. Turn the cap and reinstall it in the regulator with "LP"...
- Page 18 Conversion Kit Replacing the oven's burners nozzles (This operation does not require primary air regulation). C24GGXU ( ” 608 mm) 1) Oven burner: Open the oven door and remove any accessories that are inside. 2) Lift up the oven surface and pull it outwards.
- Page 19 Conversion Kit Replacing the oven's burners nozzles (This operation does not require primary air regulation). C36GGXU ( ” 908 mm) 1) Oven burner: Open the oven door and remove any accessories that are inside. 2) Unscrew the two fastening screws before removing the oven floor.
- Page 20 Conversion Kit 6) Using a 7mm socket wrench replace the nozzle, installing that appropriate for the type of gas to be used. Refer to the gas charts at point 5. 7) WARNING: The tightening torque of the nozzle must be equal to 4 Nm. After replacing the nozzle, put the burner back in its place.
- Page 21 Conversion Kit 1) Broil burner: Open the oven door and remove any accessories that are inside. 2) Unscrew the two fastening screws for the burner. 3) Remove the burner by sliding it from its place and reposition it as shown in the picture.
- Page 22 Conversion Kit To adjust the range for LP gas or to return to Natural Gas use, refer to the charts below. C24GGXU ( ” 608 mm) Natural gas Injector Ø mm Front Right 6200 1.20 1500 Front Left 6200 1.20...
- Page 23 Conversion Kit C36GGXU ( ” 908 mm) Natural gas Injector Ø mm Front Right 6200 1.20 1500 Front Center 3400 0.90 1200 Front Left 6200 1.20 1500 Rear Left 3400 0.90 1200 Inner 0.80 1000 Rear Center 14400 Outer 1.65 2000 Rear Right 10000...
-
Page 24: Natural Gas
Conversion Kit Follow these instructions to leak test the appliance: Use a brush and liquid detergent to test all gas connections for leaks. Bubbles around connections indicate a leak. If a leak appears, shut off the gas valve controls and adjust the connections. Then check the connections again.