Smeg CE6GPXU Owner's Manual page 3

Important Safety Instruction
WHAT TO DO IF YOU SMELL GAS
• Do not attempt to turn on or light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
• lf you cannot reach your gas supplier, call the Fire Department.
Installation and service must be performed by a qualified installer, service company or gas supplier.
2. INSTALLATION
- Before installation, make sure that the voltage and frequency listed on the ID plate match the
household electrical supply. This data must be the same to prevent personal injury or damage to the
appliance. Consult a qualified electrician if in doubt.
- Make sure your appliance is properly installed and grounded by a qualified installer.
- To guarantee the electrical safety of this appliance, it must always be continuously connected to a
reliable grounding system. This basic safety requirement must be met. If there is any doubt, have
your household electrical system checked by a qualified electrician.
- The manufacturer is not responsible for damage caused by the lack or inadequacy of a reliable
grounding system or the failure to meet the requirements of national and local electrical codes.
- The appliance should not be operated until it has been properly installed within the cabinetry.
- Installation, maintenance and repair work should be performed by an authorized service technician.
Work by unqualified persons can be dangerous and may void the warranty.
- Before installing or servicing, disconnect the power supply to the work area by "tripping" the circuit
breaker, or shutting off the main power.
CAUTION: To eliminate the risk of burns or fire caused by reaching over heated surface units, cabinet
storage located above the surface unit should be avoided.
5