Smeg CE6GPXU Owner's Manual page 28

11.7 Programming the self-cleaning cycle
1 Use PT2 to select the self-cleaning function.
2 To start the self-cleaning cycle, press the button to set cycle duration.
3 Press the
time from a minimum of 1 hour 30 minutes to a maximum of 3 hours.
4 The word "CLEA" will appear on the display to indicate that the oven
is in the self-cleaning cycle; the time remaining for the self-cleaning
to end will be shown.
11.7.1During and after the self-cleaning cycle
5 One minute after the self-cleaning cycle starts, an interlock device will
be engaged that prevents the oven door from being opened. The
symbol lights up on the display to indicate that this interlock device has
been enabled.
6 At the end of the self-cleaning cycle (indicated by a tone and by STOP
on the display) the door interlock device will remain enabled until the
temperature inside the oven has reached a safe temperature. When the
oven has cooled down, wipe up any ash or residue with a damp
microfiber cloth.
Once the door interlock has been enabled, no oven functions can be selected.
Wait for the
11.7.2Setting the self-cleaning cycle with delayed start
1 Repeat steps 1, 2 and 3 described in "11.7 Programming the self-
cleaning cycle".
2 After setting the cleaning time, press the
symbol
3 By pressing the
when you wish cleaning to start.
4 A few seconds after the self-cleaning cycle time is set, the
symbols are steadily illuminated and the oven will enter standby mode
as it waits for for the self-cleaning cycle start time.
30
User instructions
or button to advance or decrease the cleaning
symbol to turn off.
and the current time will appear on the display.
or buttons you can select the time of day
button again. The
and