Load Default Setup - Swann 8600 Series User Manual

Remove the USB flash to the DVR. Enter TOOLS configuration, referring to 4.2.10 Tools Configuration.
STEP2
Click Update. A window will appear, which reminds users that it will automatically load default settings after
STEP3
update.
Press OK to begin. The process bar will display on the screen during update.
STEP4
After finished, the unit needs restart.
STEP5
Notice: If a "no device or no file" error appears, it is possible that the USB device is incompatible. Please change an USB flash.
Please be patient to wait. It will take 2-3 minutes to update.

5.3 Load Default Setup

The DVR has different setup blocks, like Basic, Record, Schedule, Motion etc. Users can choose any block to do default,
as Fig 5.2 Reset Blocks.
Enter TOOLS configuration, referring to 4.2.10 Tools Configuration.
STEP1
Digital Video Recorder User Manual
Fig 5.2 Reset Blocks
67