Before You Begin; Fcc Verification; Important Note; Important Safety Instructions - Swann NVR-7085 models Instruction Manual

Before You Begin

FCC Verification

Note: This equipment has been tested and found to comply
with the limits for Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the
receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician
for help
These devices comply with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• These devices may not cause harmful interference, and
• These devices must accept any interference received,
including interference that may cause undesired
operation.

IMPORTANT NOTE:

All jurisdictions have specific laws and regulations relating
to the use of cameras. Before using any camera for any
purpose, it is the buyer's responsibility to be aware of all
applicable laws and regulations that prohibit or limit the
use of cameras and to comply with the applicable laws and
regulations.
FCC Regulation (for USA):
Prohibition against eavesdropping
Except for the operations of law enforcement officers
conducted under lawful authority, no person shall use,
either directly or indirectly, a device operated pursuant to
the provisions of this Part for the purpose of overhearing
or recording the private conversations of others unless
such use is authorized by all of the parties engaging in the
conversation.
WARNING
Modifications not approved by the party responsible for
compliance could void user's authority to operate the
equipment.

IMPORTANT SAFETY INSTRUCTIONS

• Make sure product is fixed correctly and stable if
fastened in place
• Do not operate if wires and terminals are exposed
• Do not cover vents on the side or back of the NVR and
allow adequate space for ventilation
2
DEFAULT PASSWORD INFORMATION
To ensure your privacy, this NVR supports password
protection.
The default, all-access username is 'admin', the default
password is '12345'.
To ensure your ongoing privacy, we strongly recommend
setting a password as soon as possible. Choose something
that you'll remember, but that others would be unlikely to
guess.
IMPORTANT NOTICE - Do NOT lose or
forget your password. To ensure that
your NVR has the best security possible,
password recovery has been designed to be
a complicated and time consuming process.
Only a select number of staff at the Swann
Technical Support Telephone Helpdesk can
assist. Password retrieval can take several
days, which means you will NOT be able to
access your NVR during this time.
BATTERY INFORMATION
This product contains a removable battery. If you need to
replace or dispose of the internal battery.
The battery is located on the mainboard of the NVR. It is a
primary lithium CR2032 button cell.
To access, remove and/or replace the battery:
Ensure the NVR is turned OFF. NEVER open the NVR's
•
case while power is connected.
• Remove the five screws holding the cover on the NVR.
• If replacing the battery, ensure that it is an exact match
for size, type and capacity.
• Be sure to safely dispose of the battery. The process
for battery disposal/recycling varies from location to
location, please check with the relevant local authority
for method.
BATTERY SAFETY INSTRUCTIONS
Do NOT attempt to open, puncture, disassemble or
•
modify the battery in any way.
Do NOT subject it to sudden shock or heat.
•
Do NOT dispose of battery in fire.
•