Manual Recording - Swann 8600 Series User Manual

Set Video quality, Frame rate, and Resolution.
STEP2
Have Audio checked if you input audio and want to record. Check Time stamp to record
STEP3
Enable recording function for cameras in Record option.
STEP4
Notice: If have camera uncheck here, it will not record in any recording mode.
Set Alarm record hold time. It is for post alarm recording.
STEP5
Enable Recycle. It covers old video once HDD full. If you have it unchecked, it will stop recording auto once
STEP6
HDD full
Click OK to finish
STEP7
Notice: The higher the used storage of every hour, the higher the value of Video quality, Frame rate and Resolution.
This Unit supports pre-alarm recording. But no option to set the pre-alarm recording time, the default is 10 seconds

3.3.2 Manual Recording

Just press REC button on the front panel after quitting system setup. Press Stop button to stop recording.
Or press REC button on remote controller, click again to stop.
24
Digital Video Recorder User Manual
Fig 3.7 Record Setup