Swann 8600 Series User Manual page 59

Digital Video Recorder User Manual
Fig 4.7 Record Configuration
Here users can set record quality, frame rate, resolution, and recycle. The following are the definitions of every option.
Video quality: it has 5 options from lowest to highest. The higher the value is, the clearer the recorded picture is.
Frame rate: set recorded frame rate.
Audio: enable audio to record.
Time stamp: record the current time to video file if checked.
Record: Switch on/off recording function for every camera. It records the camera only if having the camera checked here.
Then you can use manual, timer, motion detection, and sensor alarm recording.
Resolution: it supports CIF and D1. Now only CIF works.
Alarm record hold time(S): set the post record time after alarm finishes. It has 4 options, 30, 60, 120, and 180.
Recycle: enable recycle. It unchecked here, it will stop recording when HDD full.
Notice: Video quality, frame rate, and resolution are tightly related with the used storage. The higher the value is, the higher the bit rate and the
52