Blacklist; Sip Settings - ATCOM IPPBX IP04 User Manual

Hide thumbs Also See for IPPBX IP04:
Table of Contents

Advertisement

IPPBX IP04 User Manual
Asterisk cmd DAHDILookup configuration.
NOTE: You must prefix custom_ to your custom file and context to avoid conflict with the system
file,users.conf,extensions.conf and chan_dahdi.conf.

7.9 Blacklist

Block incoming calls from specified numbers
If a number in blacklist dial into IPPBX, caller will hear following prompt: "Then number you have dialed is not in
service. Please check the number and try again." Then system will then disconnect the call.

7.10 SIP Settings

1) General
UDP Port
Set the SIP port (UDP) which IPPBX is listening to.
Enable TCP
Enable TCP protocol for SIP.
TCP Port
Set the SIP port (TCP) which IPPBX is listening to.
Registration / Subscription Time Max
Maximum duration in seconds of a SIP registration / subscription.
Registration / Subscription Time Min
Minimum duration in seconds of a SIP registration / subscription.
~ 46 ~
ATCOM TECHNOLOGY CO., LIMITED

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents