Call Back - ATCOM IPPBX IP04 User Manual

IPPBX IP04 User Manual
When caller get into the DISA, this password is needed to put before making calls.
Response Timeout
The maximum time in seconds IPPBX will wait for input from a user.
Digit Timeout
The maximum time allowed between entry of digits. If exceeded, user input is deemed to have finished.
2) Outbound Trunks
Choose the outbound route that callers can use to dial out.
For example: Both City A and B have a IPPBX, IPPBX-A and IPPBX-B, they are connected with SIP trunk, and
IPPBX-A has FXO trunk to connect local PSTN and outbound route for that, DISA can be used as below:
1. Create a DISA in IPPBX-A including the FXO trunk.
2. Set it as the destination of inbound route for SIP trunk.
After users of IPPBX-B dial into DISA application in IPPBX-A, The DISA application in turn requires the user to
enter his passcode, followed by the pound sign (#). If the passcode is correct, the user will hear dialtone on which
a outbound call may be placed, so there is no long distance call fees.

7.6 Call Back

A callback will hang up on the caller and then call them back, directing them to the selected destination. This is
useful for reducing mobile phone charges as well as other applications. Outbound calls will proceed according to
the dial patterns in Outbound Routes
Callback Name
A name for the Callback
~ 41 ~
ATCOM TECHNOLOGY CO., LIMITED