Troubleshooting; Led And Lcd Diagnosis; Media Problems - Argox Xellent X-1000VL User Manual

Normally, if the printer is in not working properly, the "READY" LED
blinks continuously, and printing and communication between the
host and printer stops.

LED and LCD Diagnosis

Blinking LEDs indicate a problem. Check the LEDs and the LCD
display and refer to the following solutions:

Media Problems

LED/LCD
READY and MEDIA LEDs
LCD Display
Possible Problems
Miss-detected gap
Media out
Media not installed
Media jam
Note: If problem continues perform a label sensor calibration.

4. Troubleshooting

Blinking
MEDIA OUT
Solutions
Check the media path
Check the position of
the label sensor
Supply the media roll
Install the media roll
Recover the jam
68
Indication
Remarks
For continuous
media, check
application and
driver, and select
continuous media.