Printer Status - Argox Xellent X-1000VL User Manual

Cutter failed
Memory full
Note: After problem is solved, press CANCEL to continue printing.

Printer Status

LCD display
PAUSE
MEDIA OUT
RIBBON OUT
SERIAL IO
ERROR
CUTTER FAILED READY
MEMORY FULL
 Check the media.
 Check the connection
between cutter and main
board.
 Call for service.
Check graphics and soft
fonts from host. Delete by
application software for
those no longer in use.
Blinking
LED
READY Printer is paused. Press PAUSE or
CANCEL to return to normal.
Media is uninstalled or used up. Load new
MEDIA
media to the printer.
READY
RIBBON Ribbon is uninstalled or end-of-ribbon
occurred. Load new ribbon to the printer.
READY
Format or baud rate of RS232
READY
communication is inconsistent between
printer and host.
Cutter cannot cut off the media, check
media and cutter.
READY Printer buffer full due to loaded soft fonts,
70
Need to reboot the
system.
Description