Features & Operating Controls - Wells SMPT Owner's Manual

FEATURES & OPERATING CONTROLS
INDICATOR
LIGHT
TEMPERATURE
CONTROL
KNOB
MOUNT INTO
THREADED
HOLES IN
WARMER
FRAME
TURN BOTTOM
PORTION TO
ADJUST
A. THERMOSTAT
1. On thermostatically controlled warmers, power is applied to the
heating element according to the control knob position and the
actual temperature at the temperature sensing thermobulb.
2. The desired temperature is controlled by rotating the
temperature control knob. The knob has a numeric scale, where
higher numbers correspond to higher temperature.
3. On warmers equipped with an indicator light, the light will glow
IL2462
when the thermostat is calling for heat (i.e. the element is
energized).
4. The TEMPERATURE CONTROL KNOB will rotate approximately
300º, and will reach a "stop" at both ends. The OFF position is
marked.
NOTE: The dial position is an indication of the temperature
setting. Actual temperature will vary depending upon the type of
product and food consistency.
B. ADJUSTABLE LEGS
1. Countertop warmers are equipped with adjustable legs.
These legs allow for:
a. leveling the warmer
b. ventilation around the warmer, and
c. cleaning under the warmer.
2. Adjustable legs are supplied with the warmer, the legs MUST be
properly installed before the warmer is placed into operation.
IL2461
2