Table of Contents
Advertisement
FEATURES & OPERATING CONTROLS
INDICATOR
LIGHT
TEMPERATURE
CONTROL
KNOB
WELLSLOKS
A. THERMOSTAT
1.
On thermostatically controlled warmers, power is applied to the
heating element according to the control knob position and the
actual temperature at the temperature sensing thermobulb.
2.
The desired temperature is controlled by rotating the temperature
control knob. The knob has a numeric scale, where higher
numbers correspond to higher temperature.
3.
On warmers equipped with an indicator light, the light will glow
when the thermostat is calling for heat (i.e. the element is
IL2468
energized).
4.
The TEMPERATURE CONTROL KNOB will rotate approximately
300º, and will reach a "stop" at both ends.
The OFF position is marked.
NOTE: The dial position is an indication of the temperature setting.
Actual temperature will vary depending upon the type of product
and food consistency.
B. MOUNTING
1.
MOD-series built-in warmers may are equipped with wellsloks,
uniquely designed turnout tabs which help secure the warmer top
flange to the countertop.
2.
See the Installation Instructions, supplied with the particular
appliance, for details.
C. DRAINS
IL2469
1.
Suffix "D" units (e.g. MOD-300TD) have drains for each pan,
with each pan having an individual drain valve.
2
Advertisement
Table of Contents
