Page 1
Additional manuals are available from your WELLS DEALER. THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any questions concerning installation, operation or maintenance of this equipment.
LIMITED WARRANTY STATEMENT Unless otherwise specified, all commercial cooking personnel. The prices charged by Wells Bloomfield for its equipment manufactured by WELLS BLOOMFIELD, LLC is products are based upon the limitations in this warranty. warranted against defects in materials and workmanship Seller’s obligation under this warranty is limited to the...
PARTS & SERVICE CUSTOMER SERVICE DATA INTRODUCTION Thank You for purchasing this Wells Bloomfield appliance. Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.
FEATURES & OPERATING CONTROLS A. THERMOSTAT INDICATOR 1. On thermostatically controlled warmers, power is applied to the LIGHT heating element according to the control knob position and the actual temperature at the temperature sensing thermobulb. 2. The desired temperature is controlled by rotating the temperature control knob.
Do not operate this appliance if the control panel is damaged. read and followed. Damage Call your Authorized Wells Service Agent for service. to the appliance may result The technical content of this manual, including any wiring diagrams,...
INSTALLATION NOTE: DO NOT discard UNPACkING & INSPECTION the carton or other packing Carefully remove the appliance from the carton. Remove all protective materials until you have plastic film, packing materials and accessories from the Appliance inspected the appliance for before connecting electrical power or otherwise performing any hidden damage and tested it installation procedure.
CAUTION: Wells Manufacturing recommends operating WET for SHOCk HAzARD consistent food heating. If your wet-operation warmer is allowed to run dry, turn it...
DO NOT submerge warmer element, causing a potential fire and/or electric shock hazard. in water. Contact your Authorized Wells Service Agency to inspect the warmer if you suspect water or grease contamination. Add proper amount of warm water. Reconnect warmer to electric power.
Page 9
CLEANING INSTRUCTIONS (continued) CAUTION: WEEkLY CLEANING INSTRUCTIONS CHEMICAL BURN PREPARATIONS: Remove any insets, pans and/or adapter tops. HAzARD Drain or remove water from well if used for wet Deilimng chemicals may be operation. caustic. Wear appropriate personal protective equipment. FREQUENCY: Weekly, or whenever lime or scale is seen Follow cleaner manufacturer’s accumulating on the sides of the warmer pans.
Connected to wrong voltage warmer nameplate Remove water from pan until 1” of water Too much water remains in pan There are no user-serviceable components in this appliance. In all instances of damage or malfunction, contact your Authorized Wells Service Agency for repairs.
Never use metal implements, wire brushes, abrasive scratch pads or steel wool to clean stainless steel. Warmer pans, insets and other vessels are subject to a harsher environment. Wells Manufacturing uses an very high quality stainless steel (#304DDQ) for our food warmer pans.
EXPLODED VIEW: SMPT MODEL SMPT MODEL: SMPT IL1927, Rev. A, PL001...
Page 13
PARTS LIST: SMPT MODEL: SMPT FABRICATED WARMER Item No Part No Description Application 2P-38628 PLUG HOLE 5/8 DIA D8-WL0339 ASSY, CORDSET 120V, 15A 14G D8-WL0340 ASSY, CORDSET 6-15P 16/3W 4FT D8-WL0342 ASM-CORD SET CEE7/VII 230V 2K-31217 STRAIN RELIEF 90DEG D8-303352...
Page 14
EXPLODED VIEW: SMPT-27 MODEL SMPT-27 MODEL: SMPT-27 SOME ITEMS ARE INCLUDED FOR ILLUSTRATION PURPOSES AND MAY IL1928, Rev. B, PL001 VARY SLIGHTLY FROM ACTUAL APPEARANCE.
Page 15
SMPTD-27 2R-Y5052 BLK PLASTIC LEG, 4” 2R-40498 KNOB ASSY D8-30256 TRIM RING ASSY 2T-38968 THERMO K TYPE 2N-301981UL ELEM 120V 1650W SMPT-27 120V 2N-300706UL ELEM 240V 1650W 12X27 240V 2C-30397 CLIP ELEM WARMERS D8-301955 PAN ASSY SMPT-27 D8-WL0326 PAN ASSY-12X27 w/ELBOW...
Page 21
WIRING DIAGRAM HMPGW PARTS LIST PART NO DESCRIPTION 2N-40526UL ELEM 220V, 1650W HMP P2-307356 CORDSET HMPG 120V WENDYS 2E-30330 SWITCH ON OFF TOGGLE 20A 2J-35697 LIGHT PILOT GREEN 250V 2T-40528 THERMO CTRL-185F, HMP POWER CORD WIRING DIAGRAM FOR HMP-G 120V, 60HZ, SINGLE PHASE 240V, 50HZ, SINGLE PHASE SWITCH (ON/OFF)
Always use an inset. DO NOT place food directly ADAPTERS & INSETS into the warmer pan. ADAPTER TOP, convert SMPT, HW/SMP or 1 side of TMPT to hold three 4 qt. insets 5D-21615 ADAPTER TOP, convert SMPT, HW/SMP or 1 side of TMPT to hold one 7 qt.
ACCESSORIES For factory authorized service, or to order factory authorized 8 oz. SOUP LADLE 2L-47567 replacement parts, contact your Wells authorized service agency, or call: *LEGS, 1” Plastic, set of 4 WS-21109 *LEGS, 2” Plastic, set of 4 5D-20605 Wells Bloomfield, LLC 10 Sunnen Dr., P.O.Box 430129...
Page 24
WELLS BLOOMFIELD, LLC 10 Sunnen Dr., St. Louis, MO 63143 telephone: 314-678-6314 fax: 314-781-2714 www.wellsbloomfield.com...