Pre-Operation Checkout; Cold Weather Operation; Tool Operation; Storage - Stanley CT06 Safety And Operation Manual

This section includes the following topics:

• pre-operation checkout

• cold weather operation

• tool operation

• storage

The CT06 Hydraulic Crimping Tool has a continuous 360° swivel to allow
the operator to crimp connectors and conductors from any angle.
Careful inspection of the tool and hydraulic system before startup is
important for safe, reliable operation of the tool.
The following items should be checked daily at the start and the end of
each work shift.
1. If the hoses are not connected, follow the instructions in Section 4,
Hydraulic Hose Connection. Wipe all hose couplers with a clean, lint-
free cloth before making connections. Dirty couplers can contaminate
the hydraulic lines and prevent a good seal at the connection.
2. Check all fasteners for tightness.
3. Check the equipment for oil leaks. If leaks are observed, do not use the
tool; have the equipment serviced before use.
4. Check the tool and hydraulic system for proper operation and
performance.
5. If the equipment does not appear to operate properly, have it serviced
before use.
6. Periodically verify the crimping force in the tool. Refer to Section 4,
Die Load Verification.