Stanley CT06 Safety And Operation Manual page 25

7. Remove the tool by lifting it clear of the cable.
1. Move the hydraulic system control valve to the OFF position.
2. Disconnect the hydraulic hoses from the tool—first the input (supply) hose,
then the output (return) hose.
3. Wipe the tool thoroughly with a clean dry cloth.
4. Clean any foreign matter or connector sleeve, joint compound from the tool-
head surfaces.
5. Close the latch and insert the latch pin.
Replace any damaged or missing safety labels and tags before storing the tool.
Otherwise, the tool might be improperly used by someone who is not familiar
with the safety requirements.
Store the tool in a clean, dry, secure place.