Compatibility - Stanley CT06 Safety And Operation Manual

This manual contains instructions for the safe and proper operation and
maintenance of the Stanley CT06 Hydraulic Crimping Tool. To prevent
personal injury or damage to the equipment, it is important to know the correct
operating procedures and all the safety requirements before initial startup.
Read sections 1 through 5 of this manual before using the tool for the
first time.
The CT06 Hydraulic Crimping Tool has been designed and manufactured
with high-quality materials and workmanship. It will provide efficient and
reliable service when used as directed.
Continuing product development may result in changes that are not
reflected in this manual. If you have any questions regarding the operation
or maintenance of the equipment, contact your Stanley distributor for the
most current information.
For the nearest authorized and certified distributor, call Stanley
Hydraulic Tools, (503) 659-5660, and ask for a Customer Service
representative.
Stanley CT crimpers can be powered from hydraulic circuits
already installed on line trucks or from dedicated power units. The
tool requires no intensifier or booster, saving space in the bucket.
The CT06 crimper uses an Anderson die-less head (VC6-FT, FC6-
FTV, FC6-FTR, or FC6-FTVR). It has a continuous 360° swiveling
head to allow the operator to crimp connectors and conductors
from any angle. The tool can be easily adjusted for open- or closed-
center compatibility.
!