Parameters Usable In Surround Decoder - Yamaha HTR-2064 Owner's Manual

■
Parameters usable in certain sound field
programs
2ch Stereo only
Direct
Automatically bypasses the DSP circuit and tone control circuit
depending on the condition of tone control etc., when an analog
sound source is played back. You can enjoy a higher quality sound.
Auto (Default) Outputs sound by bypassing the DSP circuit and tone
control circuit when both tone controls of "Bass" and
"Treble" are set to 0dB.
Off Does not bypass the DSP circuit and tone control
circuit.
5ch Stereo only
CT Level
J1
Adjusts the center channel volume.
Adjustable range 0 to 100%
Default setting 100%
SL Level
Adjusts the volume of the surround L channel.
Adjustable range 0 to 100%
Default setting 100%
SR Level
Adjusts the volume of the surround R channel.
Adjustable range
0 to 100%
Default setting
100%
J
1 : Not displayed when speakers are set to be inactive.
Straight Enhancer/5ch Enhancer only
EFCT LVL
Adjusts the effect level of the Compressed Music Enhancer mode.
High (Default)
Low
■

Parameters usable in surround decoder

q PLII Music only
Panorama
Adjusts the soundscape of the front sound field. Sends front left/
right channels sounds to the surround speakers as well as the front
speakers for a wraparound effect.
Off (Default)
On
CT Width
Spreads the center channel sound to the front left and right
speakers to suit your needs or preferences. Set this parameter to 0
for outputting the center sound from the center speaker only, or to 7
J1
for outputting it from the front left/right speaker only.
Adjustable range
Default setting
J1
Standard effect.
Sets when the high-frequency signals of the source are
emphasized excessively.
Disables the effect.
Enables the effect.
0 to 7
3
Setting sound field program parameters
Dimension
Adjusts the difference in level between the front sound field and
the surround sound field. You can adjust the difference in level
created by the software being played back to obtain the preferred
sound balance.
The surround sound gets stronger as you make the value more
negative, and the front sound gets stronger as you make the value
more positive.
Adjustable range -3 to +3
Default setting 0
SETUP
43
En