About This Manual; Supplied Accessories - Yamaha HTR-2064 Owner's Manual

About this manual

• This manual is printed prior to production. Design and
specifications are subject to change in part as a result of
improvements, etc. In case of differences between the manual and
product, the product has priority.
d
• " HDMI1" (example) indicates the name of the parts on the
remote control. Refer to the "Remote control"
information about each position of the parts.
J
•
1 indicates that the reference is in the footnote. Refer to the
corresponding numbers on the bottom of the page.
☞
• indicates the page describing the related information.
• Click on the " " at the bottom of the page to display the
corresponding page in "Part names and functions."
Front panel
Rear panel
Front panel display
Remote control

Supplied accessories

Check that you received all of the following parts.
(☞p. 8) for the
Remote control
Indoor FM antenna
(for U.S.A., Canada, General,
and Asia models)
CD-ROM
(Owner's Manual)
■ Installing batteries in the remote control
When inserting batteries in the remote control, remove the
battery compartment cover from the reverse side of the remote
control, and insert two AAA batteries into the battery
compartment so that they match with the polarity markings (+
and -).
Battery compartment
Batteries (2)
cover
(AAA, R03, UM-4)
Indoor FM antenna
Replace the batteries with new ones if the following symptoms
(for U.K., Europe and Australia
become evident:
models)
• The remote control can only be operated within a narrow range.
b
• TRANSMIT
NOTE
If there are remote control codes for external components
registered to the remote control, removing the batteries for more
than two minutes, or leaving exhausted batteries in the remote
control, the remote control codes may be cleared. If this should
occur, replace the batteries with new ones, and set the remote
control codes.
INTRODUCTION
Features and capabilities
a
c
b
Battery compartment
does not light up, or only lights dimly.
En
4