Step 3: Set The Distance From The Listening Point - Yamaha HTR-2064 Owner's Manual

TRANSMIT
RECEIVER
SLEEP
iCursor B / C
5 Use
1 2 3 (subwoofer) you want to configure, and
HDMI
then use
1 2 3
AUDIO
status and size.
4 5 6
Information
TUNER
TUNER
Subwoofer
MEMORY
PRESET TUNING
Front
INFO
ENHANCER
MOVIE MUSIC STEREO
SOUND
STRAIGHT SUR. DECODE
Center
SCENE
BD
TV CD RADIO
DVD
SETUP
OPTION
i
ENTER VOLUME
Sur. LR
RETURN
MUTE
Crossover
SWFR Phase
Extra Bass
i
Cursor B / C / D / E
i
ENTER
i
RETURN
This setting is not needed when you use the speakers
that are included in the Yamaha Home Theatre
Package.
to select the speaker
iCursor D / E
to select speaker
Description Setting
Sets the subwoofer status. Yes / None
Selects the size (sound Small /
reproduction capacity) of the Large
front speakers.
Selects the size of the center None /
speakers. Choose "None" if Small /
you do not have a center Large
speaker connected.
Selects the size of the surround None /
speakers. Choose "None" if Small /
you do not have surround Large
speakers connected.
Audio with a frequency below 40Hz to
this limit will be output from 200Hz
the subwoofer or the front
speakers.
Switches the phase of the NRM / REV
subwoofer.
Selects whether to play front On / Off
channel low-frequency
components through either of
the front speakers or the
subwoofer (Off), or through
both the subwoofer and front
speakers (On).
■ The case of general speakers
• Whether or not you set "Crossover," "SWFR Phase,"
and "Extra Bass" is optional. Check how the effects
sound and then configure them to your liking.
• Use the following as a guide when setting speaker
sizes.
Woofer diameter
• 16 cm or larger → Large
• 16 cm or smaller → Small
When speaker size is set to "Small," low-frequency
components of the speakers you configured are
produced from the subwoofer (or from the front
speakers if there is no subwoofer).
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
iRETURN
Press when setting is complete.
6
Return to the previous menu.
This completes step 2.
STEP 3: Set the distance from the
listening point
iCursor C
7 Press to display "Distance" and
press iENTER.
DIST
Unit;;;;meters
CONNECTIONS
Setting up speaker parameters
iCursor B / C
8 Press
that you want to configure, and press
iCursor D / E
to change the distance.
If necessary, you can change the setting units under
"Unit."
Information Description
Unit Switches between setting
units (feet / meters).
Front L Front speaker L
Front R Front speaker R
Center Center speaker
Sur. L
Surround speaker L
Sur. R
Surround speaker R
SWFR
Subwoofer
When you have completed the settings for one speaker,
repeat the same procedure for all speakers to complete
settings.
iRETURN
Press when setting is complete.
9
Return to the previous menu.
This completes step 3.
VOL.
SW
C
L R
SL SR
to select the speaker
Setting
meters (m) /
feet (ft)
0.30 m to 24.00 m
(1.0 ft to 80.0 ft)
0.30 m to 24.00 m
(1.0 ft to 80.0 ft)
0.30 m to 24.00 m
(1.0 ft to 80.0 ft)
0.30 m to 24.00 m
(1.0 ft to 80.0 ft)
0.30 m to 24.00 m
(1.0 ft to 80.0 ft)
0.30 m to 24.00 m
(1.0 ft to 80.0 ft)
Continues to the
next page
19
En