Setting Hdmi Functions - Yamaha HTR-2064 Owner's Manual

■
Auto-adjusting Dolby Digital and DTS
dynamic range
D.Range
Selects the dynamic range adjustment method for audio bitstream
(Dolby Digital and DTS) playback.
Min
Sets the dynamic range suitable for low volume or a
quiet environment, such as at night, for bitstream
signals.
Std
Adjusts the dynamic range for optimum volume for
regular home use.
Max (Default)
Produces audio without adjusting the dynamic range.
■
Setting the maximum volume
Max Volume
Sets a maximum volume level so that the audio is not played too
loudly. The default setting of +16.5 dB produces the highest
volume.
Adjustable range -30.0 dB to +15.0 dB / +16.5 dB (Maximum volume)
Default setting +16.5 dB
Adjustment 5.0 dB
increments
J
1 : When you set the "Max Volume" at a lower level than "Init.Volume," the "Max
Volume" setting has priority.
J
2 :
When "Control" is set to On, "TVAudio" and "ARC" appear. When "Control"
is set to Off, "Audio" appears.
■
Setting the startup volume
Init.Volume
Sets the initial volume for when this receiver is turned on. When
this parameter is set to "Off," the volume is set at the level when the
J1
receiver last entered standby mode.
Adjustable range Off, Mute, -80 dB to +16.5 dB
Default setting Off
Adjustment 0.5 dB
increments
Setting various functions (Setup menu)

Setting HDMI functions

SETUP
HDMI Setup
HDMI Setup submenu
Control
Turns the HDMI Control on or off.
TVAudio J2
Chooses automatically selected audio input in
conjunction with TV operation when the HDMI
Control is turned on.
ARC J2
Transmits audio/video output to the TV and audio
input from the TV through a single HDMI cable.
Audio J2
Selects the audio output device connected to this
unit via HDMI jacks.
SETUP
VOL.
SW SW
C
L R
SL SR
38
En