Fm Tuning; Selecting A Frequency For Reception (Normal Tuning) - Yamaha HTR-2064 Owner's Manual

FM tuning

TRANSMIT TRANSMIT
RECEIVER RECEIVER
SLEEP SLEEP
1 1 2 2 3 3
HDMI HDMI When using the FM tuner, adjust the direction of the
FM antenna connected to this unit to get the best
1 1 2 2 3 3
AUDIO AUDIO
reception.
4 4 5 5 6 6
(Asia and General models only)
d
TUNER
TUNER TUNER
The factory pre-set FM tuner frequency steps are
MEMORY MEMORY
d
PRESET PRESET TUNING
50 kHz.
INFO INFO
Carry out the following settings and select the frequency
ENHANCER ENHANCER
MOVIE MOVIE MUSIC MUSIC STEREO STEREO
steps suitable for your listening environment.
SOUND SOUND
STRAIGHT STRAIGHT SUR. DECODE SUR. DECODE
SCENE SCENE
Set this unit to the standby mode.
1
BD BD
TV TV CD CD RADIO RADIO
DVD DVD
SETUP SETUP
OPTION OPTION
Press A while pressing and holding
2
VOLUME VOLUME
RETURN RETURN STRAIGHT on the front panel.
Release the keys when "ADVANCED SETUP" is
MUTE MUTE
displayed on the front panel display.
After approximately 2 seconds, the top menu items are
displayed.
A
PHONES
d
TUNER SILENT CINEMA
d
TUNING H / I
REMOTE ID -ID1
J J
1 : For detailed information on the advanced setup menu see
"Extended functionality that can be configured as needed
(Advanced Setup menu)"
J
2 : When searching for a station, release the key once the search has
started.
J1
STRAIGHT
INFO MEMORY PRESET TUNING FM
SCENE
BD TV CD RADIO
DVD
INPUT TONE CONTROL PROGRAM STRAIGHT
PROGRAM l / h
(☞p. 44).
Press PROGRAM h twice to display
3
"TUNER."
TUNER - FM50
4 Press STRAIGHT a few times to select
frequency steps.
Switch this unit to the standby mode, and
5
then switch it on again.
The power turns on, with the settings you made
configured.
The FM tuner of this unit provides the following two
modes for tuning.
Normal tuning
You can tune in to a desired FM station by searching or
specifying its frequency.
Preset tuning (☞p. 27)
You can preset the frequencies of FM stations by
registering them to specific numbers, and later just select
those numbers to tune in.
PLAYBACK
Selecting a frequency for reception
(Normal tuning)
Press dTUNER to switch to the tuner input.
1
FM 87.50MHz
dTUNING H / I
2 Use to set a frequency to
receive.
TUNING H
d
Increases the frequency. Press and hold this key for
longer than a second to search automatically for a station
on a higher frequency than the current one.
TUNING I
d
Decreases the frequency. Press and hold this key for
longer than a second to search automatically for a station
J2
on a lower frequency than the current one.
Lights up when receiving Lights up when receiving
a broadcast from a station a stereo broadcast
STEREO
TUNED
FM 98.50MHz
En
VOL.
J2
VOL.
SW
C
L R
SL SR
26