Table of Contents
Advertisement
BIOS Setup Utility
3.
Enter your new password and press [Enter]. The following message
appears, prompting to confirm the new password:
4.
Re-enter your password and then press [Enter] to exit to the Main
Menu.
This diagram outlines the password selection procedure:
Type the Password
Type the Password
«
and Press: <Enter>
Press:
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
Enter Password:
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
Confirm Password:
LOAD SETUP DEFAULTS
LOAD BIOS DEFAULTS
Esc
: Quit
F10
: Save & Exit Setup
3-12 USER PASSWORD
When the user password option is on, you are not allowed to change any
setting in the [CMOS SETUP UTILITY] except for changing the user's
password.
The password setting procedure is similar to that for the [SUPERVISOR
PASSWORD] (Refer to section 3-9).
Confirm Password:
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Enter Password:
*****
*****
After you confirm the password,
After you confirm the
press <Esc> to exit
password, press
Time, Date, Hard Disk Type...
83
«
Press <Enter> without
Press:
entering the password
Without entering password
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
Password Disabled!!
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
: Select Item
°
(Shift) F2
: Change Color
to exit
SY-P4IS2
Advertisement
Table of Contents
