Motherboard Connector - SOYO SY-P4IS2 User Manual

Mpga socket 478 processor supported intel i845 agp/pci/cnr 400 mhz front side bus supported atx form factor

Hide thumbs Also See for SY-P4IS2:

Table of Contents

Hardware Installation

SY-P4IS2

Memory Configuration Table

Number of Memory

DIMM 1

DIMM 2

DIMM 3

Modules

RAM Type

SDRAM

Memory Module Size (MB)

32/64/128/256/512 MB/1 GB

2-3.3 Motherboard Connector

2-3.3.1 IDE Device Installation (HDD, CD-ROM)

Pin-1

IDE 2

IDE 1

Secondary

Primary

IDE

This Motherboard offers two primary and secondary IDE device connectors

(IDE1, IDE2). It can support up to four high-speed Ultra DMA

33/66/100HDD or CD-ROM.

Connect one side of the ATA66/100 flat cable to the IDE device (HDD or

CD-ROM) and plug the other end to the primary (IDE1) or secondary (IDE2)

directionally keyed IDE connector on the Motherboard. The ATA66/100 cable

is backward compatible with ATA33 HDDs.

Table of Contents